長壽堿蝕添加劑

JB-E01長壽堿蝕添加劑

u  產品特性

1.適合的表面活化劑、緩蝕劑易于產品出槽時滴流，有效防止流痕產生。

2.獨特的整平劑、光亮劑使處理后產品表面平整光亮有利于著色料底色更加鮮艷。

3.適量的抑霧劑有效地抑制堿霧的產生，有利于改善車間環境。

u  開槽參數

NaOH ：50～60g/L

JB－E01：20～30g/L

u  控制參數

游離堿  ：45~60g/L   AL³⁺  ：15~25 g/L

溫度  ：45～60℃     時間  ：1～5 min                                           

u  維護和管理

1.每天分析槽液濃度并根據結果及時調整，補加比例為氫氧化鈉：JB-E01=5：1。處理100m2鋁材約消耗JB-E01：0.5～1.0kg。

2.正常生產時因帶出損耗導致液面降低補加水則需添加相應比例的氫氧化鈉和JB-E01。

3.不生產時加蓋槽液以防污染。并保溫≥35℃以防鋁離子水解。

u  包裝、貯存及保質期

25kg塑料桶裝；避光、避酸、輕放、密封置干燥，陰涼處，防止泄漏。室溫存放1年。

 

JB-E01  Etching Additive

      u  Product Features

1.Contains active agent to prevent dripping mark on work piece and corrosion inhibitor.

2.With complex and appropriate leveling agent and brightener. Work piece surface will be bright, smooth and clean to enhance coloring ability.

3.Contains fog and smoke inhibitor to help improve workshop environment.

u  Tank set up parameters

NaOH ：50～60g/L

JB－E01：20～30g/L

u  Coolling parameters)

Free alkali  ：45~60g/L    AL³⁺  ：15~25 g/L

Temperature  ：45～60℃   Time  ：1～5 min                             

u  Maintenance and cool

1.Analyse bath conceation once a day. Add and maintain sodium hydroxide to JB-E01 ratio at 5:1. Typical consumption of JB-E01 is 0.5 to 1.0kg per 100mm2 of aluminum surface treated.

2.Any addition to loss of bath solution due to evaporation or dragged out, correct chemical ratio must be maintained. 

3.Cover bath if not running production to prevent contaimination. Solution temperation should be maintained at ≥35℃.

 

u  Packing and Storage

25kg plastic bucket；Protect form heating, avoid acid, keep sealed in a dry, cool place and  prevent   leakage. The product shelve life is 1 year  under room temperature