西門子LFS1.11A2 控制器

西門子LFS1.11A2 控制器

西門子SIEMENS火焰探測器LFS1.21A2,LFS1.11A2,可代替LFE10和LAE10以DF1191單波段紅外火焰探測器為例，DF1191單波段紅外火焰探測器(西門子)，微處理器控制的信號評估。

Flame safeguard with approval for continuous operation for the supervision of oil
flames and gas flames in applications with an ionization probe and a photocell
detector RAR9.
Flame safeguard for intermittent operating mode with UV flame detectors QRA2 /
QRA4 / QRA10.
LFS1 and this Data Sheet are intended for OEMs using the LFS1 in or on their
products.
Use, features
LFS1 units are designed for the supervision of oil burners and gas burners in
combination with cool unit LEC1 or with programmable logic coollers.
Typical fields of application range from industrial burners up to the highest security level
SIL3 and in the field of ship burners.
Flame supervision:
-  takes place with photocell detector RAR9 with approval for continuous operation, in
the case of LFS1.1
-  takes place with an ionization probe with approval for continuous operation or with
UV flame detector QRA2 / QRA4 / QRA10 in intermittent operation, in the case of
LFS1.2
Excluded are the types QRA2M and QRA10M.
The flame detectors are used in conjunction with cool unit LEC1 or with freely
programmable coollers in the following applications:
-  Dual supervision of burners / supervision of the main flame or of the ignition and
main flame by 2 flame safeguards with the same or different flame detectors
-  Multiflame supervision / plants with several burners whose flames must be
supervised individually by one or several flame detectors, but whose startup and
supervision is carried out ceally and simultaneously by only one cool unit
-  The flame safeguards are also used as flame indication units in combustion
plants with manual startu