鑄鋼法蘭閘閥歐洲供應商價格

進口鑄鋼法蘭閘閥

 

德國巴赫進口鑄鋼法蘭閘閥概述：Ioduction of Bach cast steel flanged gate valve imported from germany:

進口鑄鋼法蘭閘閥又稱閘板閥或閘門閥，應用較廣泛的一種閥門。它是通過閘板的升降來控制閥門的啟閉，閘板垂直于流體方向，改變閘板與閥座間相對位置即可改變通道大小。適用于公稱壓力PN1.6～16.0MPa,工作溫度≤-29℃～550℃的石油、化工、水力、火力電站各種系統的管路上，切斷或接通管路介質。

Imports the valve lock valve or gate valve, a valve is the most widely used. It cools the opening and closing of the valve through the lifting of the gate. The gate is perpendicular to the direction of the fluid and changes the relative position between the gate and the valve seat to change the channel size. For nominal pressure PN1.6 ~ 16.0MPa, -29 pipeline wong temperature less than 550 DEG C, hydraulic oil and chemical industry, thermal power plants of various systems, cut off or connected piping media.適用介質為：水、油品、蒸氣、及酸、堿、氨、尿素、含硫天然氣等。操作方式有：手動、齒輪傳動、電動、氣動等。

 

進口鑄鋼法蘭閘閥的定義：Definition of imported cast steel flanged gate valve:   

1、選材考究，符合國內外相關標準，材料的一體質量高。
2、符合國內外先進標準的要求，密封可靠、性能優良、造型美觀。
3、閥桿經調質及表面氮化處理，有良好的抗腐蝕性、抗擦傷性和耐磨性。
4、可采用各種配管法蘭標準及法蘭密封面形式，滿足各種工程需要及用戶要求。
5、采用楔式彈性閘板結構，中大口徑設置推力軸承，磨擦力小，并配有撞擊手輪，啟閉輕松自如。
6、密封副配對先進合理，閘板和閥座的密封面采用不同硬度的司太立（Stellite）鈷基硬質合金堆焊而成，密封可靠、硬度高、耐磨、耐高溫、耐腐蝕、抗擦傷性能好、壽命長。

1, material selection, in line with relevant standards at home and abroad, the overall quality of the material is high.

2、2, meet the requirements of advanced standards at home and abroad, reliable sealing, good performance, beautiful appearance.

3、3. The valve stem is quenched and tempered and treated by surface nitriding. It has good corrosion resistance, scratch resistance and wear resistance.

4、4, can use a variety of piping flange standards and flange sealing surface form, to meet the needs of various engineering and user requirements.

5、5, wedge type elastic ram structure, large and medium caliber thrust bearing, small friction force, and with impact handwheel, easy to open and close.

6、6, sealing pairs of advanced and reasonable, gate and valve seat sealing surface with different hardness of Si Taili (Stellite) cobalt based carbide surfacing, sealing reliable, high hardness, wear resistance, high temperature resistance, corrosion resistance, good scratch resistance, long life.

 

進口鑄鋼法蘭閘閥技術參數：Technical parameters of imported cast steel flanged gate valve:

產品名稱	驅動方式	連接形式	結構形式	密封結構	壓力范圍	公稱通徑	常用材質	產品型號
進口鑄鋼法蘭閘閥	手動,電動,氣動	法蘭	明桿、暗桿	硬密封	1.6-16MPA	DN15-800	鑄鋼	bach-a
閥門尺寸標準	閥門試驗標準	閥門交貨標準	工業閥門標準	法蘭閥門標準	焊接閥門標準	對夾式連接閥	內螺紋連接閥	可以提供美國
DIN EN558-2005	DIN EN12266-1-2003	DIN3230-2-1974	DIN EN 1171-2003	DIN EN 3202-1977	DIN EN 3202-1982	DIN EN 3202-1979	DIN EN 3202-1977	API、ANSI等標準